QS-650 Full Section Ballast Cleaning Machine
性能及特點
QS-650 full section ballast cleaning machine is designed to dig out, without the removal of track skeletons, the ballast under the track skeleton by means of the motion of its excavation chain, and it allows the ballast dug out to be screened by its vibrating screen. The dirt will be conveyed to the two sides of the railway in front of the machine or back to the material conveyor truck, while the clean ballast will be backfilled into the railway median directly or backfilled into the ballast bed at the two sides of the steel track behind the excavation chain by means of its backfilling conveyor belt. Due to the even backfilling of ballast over the whole section of railway track, the machine can reduce the work quantity of track tamping. For track sections subject to slurry pumping, the machine also can perform complete cleaning of ballast.
主要技術參數Overall dimension (L × W × H):31346 mm × 3150 mm × 4740 mm
Curb weight:90 t
Gauge:1435 mm
Rated power of engine:2 × 348 kW
Max. self-propelled speed:100 km/h
Max. towed speed:100 km/h or 120 km/h
Pivot distance of bogies:23000 mm
Wheelbase of bogie:1800 mm
Emergency braking distance:≤ 800 m (At a speed of 90 km/h on straight and level tracks)
Working speed:?0 ~ 1000 m/h
Min. traveling radius:180 m
Min. working radius:250 m
Min. working efficiency:≥ 650 m3/h
Max. excavation depth:1000 mm (Below the top surface of the track)
Excavation width:4030 mm, 4530 mm, 5030 mm
Swing angle of rotary dirt conveyor belt:?±70°
Max. stroke of lifting cylinder:250 mm
Max. track lining capacity:?±300 mm